3 Axis MACH3 Nema23 Stepper Motor Dual Shaft 112mm + 4 Axis CNC Motion Control Card USB Board For CNC Controller Kit Dri

• Stepper motor's red wire connect to driver's A+ port

• Stepper motor's green wire connect to driver's A- port

• Stepper motor's yellow wire connect to driver's B+ port

• Stepper motor's blue wire connect to driver's B- port

DM556S Stepper Motor Driver

It adopts the latest 32-bit DSP digital processing technology. The driver control algorithm adopts advanced variable current technology and advanced frequency conversion technology. The auto-tuning function is integrated in the driver, which can automatically generate the optimal operating parameters for different motors and maximize the performance of the motors. Users can set 200-51200 within the arbitrary subdivision and rated current within the arbitrary current value, to meet the needs of most applications. Due to the use of built-in micro-subdivision technology, even in the conditions of low subdivision, but also can achieve high subdivision effect, low, medium and high-speed operation is very smooth, ultra-low noise. Can drive 4,6,8-wire two-phase stepper motor,suitable for Nema 17,Nema23,Nema24 and Nema34 Stepper Motor;Automatic halving of current at rest.	Input Voltage: 20-50V DC ( It is recommended to use 24V DC ),Output Peak Current: 1.0A-6A; Impulse response frequency up to 500KHz (factory default 200KHz) Photoelectric isolation, alarm output Photoelectric isolated differential signal input It has rising/falling edge, IO control spontaneous pulse, single/double pulse, high response/high speed and low vibration, self-measuring function. It has the protection functions of overvoltage, undervoltage and overcurrent. Variable current control greatly reduces the heat generation of the motor Ultra-low vibration noise.	Dial Switches SW1-SW3: Set The Operating Current (1.0A-6.0A) SW4 is a Half-Current function,when SW4=off,for half-current setttings,when SW4=on,current static state for full-current lock axis SW5-SW8: Set the speed of subdivision and spontaneous pulses Function Setting: SW9:Edge sel,off=fall,on=rise SW10:S-Filter,off=4ms,on=10ms SW11-SW12:Mode Sel

4 Axis USB Mach3 control board

Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable. Support for connecting electronic handwheel; MCU model: three generation 32-bit STM processor Communication plug-in: RnR motion control card - ECO-2.0	4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device. 4 general-purpose inputs, you can connect the limit switch, estop switch, probe , back to zero and other device.	Support for 4 Axis linkage, you can connect four stepper motor drives or servo drives; Maximum step-pulse frequency is 100KHz,which is suitable for the servo or stepping motor; Have 0-10V signal output,you can use mach3 software to control the spindle motor speed. One status LED, indicate connection status on the board.

Please strictly follow the instructions and warnings before using this product:

• It is recommended that the limit switch and emergency stop switch must be installed first and can be used normally.

• The output singal of theelectronic handwheel must be 5V, more than 5V output will damage the hand wheel interface.

• This interface can output 0-10V analog signals

• USB interface is applicable to any netbook, notebook, desktop, tablet and other PC compatible computers with USB interface.

• This control board does not require any drivers to be installed,as long as Mach3 can run, the control card can be used;

• Support computer system: Windows 2000/ XP / Windows 7/8/10 (if your Win10 computer can not recognize the card,pls let us know so that we can help you solve the problem)

• The inverter interface (AVI +, AVI-) is isolated from the computer and the main control circuit, and has strong anti-interference ability,no interference signal will be introduced due to the introduction of external strong electrical equipment.

• Whether frequency converter is supported: Yes

• Support PWM: Yes

• Number of control axes: X.Y.Z.A axis

• Model: S-400W-36V

• Output Current:11A

• Output Voltage:36V

• Output Frequency:85%

• Output Power: 400W

• L: Live wire

• N: Negative wire

• +V: DC power output “+”

• -V: DC power output “-“

• +V ADJ: output voltage regulation

400W 36V 11A DC Switching power supply

Adopting high-quality shell,with better heat dissipation performance of the radiator,the power supply lasts for a long time and has a long service life. It comes with built-in cooling fan and many holes on the metal case, which makes heat dissipation more efficient.	Enough widing coils ensure pure copper,reliable performance,sufficient power,and stable work. High efficiency and low operation temperature.	110V or 220V Input: 110-120V AC or 220-240V Please flip the side input voltage selector switch

Leading intelligent manufacturing and connecting the future of CNC - Changzhou POWACE International Trade Co., Ltd.

In the rapidly developing era of intelligent manufacturing, Changzhou POWACE International Trade Co., Ltd. responds to the situation
Sheng, as a company specializing in CNC technology and equipment import and export
We are a professional foreign trade company dedicated to becoming a global CNC connector
The bridge and link of industry. Since its establishment in 2009, we have adhered to the principle of
The core price of "technology driven, quality first, service foremost"
Values, constantly exploring the infinite possibilities of CNC technology. For the world
Customers provide efficient and precise CNC solutions.

[Business Scope]

We specialize in CNC machine tools, CNC systems, and industrial machines
International trade of human automated production lines and related accessories. Introduce high-quality Chinese products to various parts of the world,
Promote the exchange and integration of global CNC technology.

[Core Advantage]

1. Professional team: equipped with a team of industry experts and technical workers
An elite team composed of Mr. Cheng and senior foreign trade personnel, who possess profound industry knowledge and rich market experience Excellent communication skills enable us to provide customers with comprehensive and personalized services.

2. Rich resources: Established partnerships with numerous well-known CNC manufacturers
Stable cooperative relationships ensure that customers can obtain
The latest and highest quality CNC products.

3. Technical support: Provide pre-sales consultation, technical training, and sales
One stop shop for post maintenance and other services to ensure that customers have used it before
There are no worries during the journey. Our technical support team is capable of
Quickly respond to customer needs and solve various technical issues Question.

4. Customized solution: Tailored according to the specific needs of customers
Customized CNC solutions. Help customers achieve production automation
Upgraded with automation and intelligence to enhance production efficiency and products
Quality.